Page 90 - EEC_HeavyDuty
P. 90
Heavy
Duty Hardware
Phillips Head sheet metal screws, with recessed Mar-Proof black Mar-Proof Screws and Speed Nuts®
nylon washers and Speed Nuts® are used to fasten Instrument Panels
to punched Vertical Mounting Rails. Screw 10B x 1 1/8” is used
with 5/8” formed panels, while 10B x 5/8” is used with flat panels.
Rear Panels, Flush Filler Panels, and Front Panels are mounted in For mounting Flat or For mounting Rear Panels,
the cabinet frame recess, but fastened to the punched Vertical 5/8” Formed Front Panels
Mounting Rails with Phillips Head sheet metal screws, 10B x 2”
with recessed Mar-Proof black nylon washers and Speed Nuts®. Instrument Panels and Flush Filler Panels
Screws and Speed Nuts® have Zinc Plating with Trivalent
Chromium Passivation.
Mar-Proof Machine Screws
If tapped Vertical Mounting Sheet Metal Screws and Speed Nuts®
Rails have been substituted for
punched rails, the flat or 5/8” For mounting Flat, 5/8” For mounting Screw fastened Flush Side Panels
Formed Instrument Panels are Formed Instrument, or Filler Screw type side panels for Vertical Rack and Sloped Front
fastened to the mounting rails Cabinets mount in the recess of the
with 10-32 Phillips Head and I/O Panels frame side. They are fastened
machine screws used with a from inside of the frame by 10BA
Mar-proof recessed black nylon x 23/32” Phillips Head sheet metal
washer. For Filler Panels and screws. The screws and Speed
I/O Panels use 1 3/4” long. Nuts® have Zinc Plating with
Trivalent Chromium Passivation.
Screws, Speed Nuts® and Cage Nuts
The Vertical Mounting Rail Support Channels are fastened to all
Vertical Rack and Sloped Front Cabinet frames with 10BAx
23/32” Phillips Hex Head sheet metal screws. The screws, cage
nuts and Speed Nuts® have Zinc Plating with Trivalent Chromium
Passivation.
Vertical Mounting Rails are attached to Mounting Rail Support For mounting For attaching Vertical Mounting
Channels with 1/4-20 x 3/4” Hex Head Sems machine screws and Vertical Mounting Rail Rails to Vertical Mounting Rail
1/4-20 cage nuts. When attached to fixed brackets, the angles are
fastened with the same screws engaging 1/4-20 spot-weld nuts. Support Channels Support Channels
Please see the table below for part numbers.
HARDWARE
For Mounting Panels
Type of Mar-Proof Mar-Proof Machine Screws Sheet Metal Hex Head Cage Speed
Panel Nut®
Mounting Screws 1/2” 1” 1 3/4” Screws Screws Nut
Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No.
Flat Panels 80-0102-05 80-0202-05 80-0201-05 257-002-005
5/8” Formed Inst. 80-0101-05 80-0201-05 257-002-005
Rear Panels 251-011-004 257-002-005
Front Panels 251-011-004 257-002-005
Flush Filler 251-011-004 257-002-005
Filler and I/O 253-004-003
Angle Spt. Channel 286-005-004 80-0405-03
Mounting Angles 80-0304-03 286-004-004
Screw Side Panels 286-005-004 285-004-005
A90 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
Duty Hardware
Phillips Head sheet metal screws, with recessed Mar-Proof black Mar-Proof Screws and Speed Nuts®
nylon washers and Speed Nuts® are used to fasten Instrument Panels
to punched Vertical Mounting Rails. Screw 10B x 1 1/8” is used
with 5/8” formed panels, while 10B x 5/8” is used with flat panels.
Rear Panels, Flush Filler Panels, and Front Panels are mounted in For mounting Flat or For mounting Rear Panels,
the cabinet frame recess, but fastened to the punched Vertical 5/8” Formed Front Panels
Mounting Rails with Phillips Head sheet metal screws, 10B x 2”
with recessed Mar-Proof black nylon washers and Speed Nuts®. Instrument Panels and Flush Filler Panels
Screws and Speed Nuts® have Zinc Plating with Trivalent
Chromium Passivation.
Mar-Proof Machine Screws
If tapped Vertical Mounting Sheet Metal Screws and Speed Nuts®
Rails have been substituted for
punched rails, the flat or 5/8” For mounting Flat, 5/8” For mounting Screw fastened Flush Side Panels
Formed Instrument Panels are Formed Instrument, or Filler Screw type side panels for Vertical Rack and Sloped Front
fastened to the mounting rails Cabinets mount in the recess of the
with 10-32 Phillips Head and I/O Panels frame side. They are fastened
machine screws used with a from inside of the frame by 10BA
Mar-proof recessed black nylon x 23/32” Phillips Head sheet metal
washer. For Filler Panels and screws. The screws and Speed
I/O Panels use 1 3/4” long. Nuts® have Zinc Plating with
Trivalent Chromium Passivation.
Screws, Speed Nuts® and Cage Nuts
The Vertical Mounting Rail Support Channels are fastened to all
Vertical Rack and Sloped Front Cabinet frames with 10BAx
23/32” Phillips Hex Head sheet metal screws. The screws, cage
nuts and Speed Nuts® have Zinc Plating with Trivalent Chromium
Passivation.
Vertical Mounting Rails are attached to Mounting Rail Support For mounting For attaching Vertical Mounting
Channels with 1/4-20 x 3/4” Hex Head Sems machine screws and Vertical Mounting Rail Rails to Vertical Mounting Rail
1/4-20 cage nuts. When attached to fixed brackets, the angles are
fastened with the same screws engaging 1/4-20 spot-weld nuts. Support Channels Support Channels
Please see the table below for part numbers.
HARDWARE
For Mounting Panels
Type of Mar-Proof Mar-Proof Machine Screws Sheet Metal Hex Head Cage Speed
Panel Nut®
Mounting Screws 1/2” 1” 1 3/4” Screws Screws Nut
Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No.
Flat Panels 80-0102-05 80-0202-05 80-0201-05 257-002-005
5/8” Formed Inst. 80-0101-05 80-0201-05 257-002-005
Rear Panels 251-011-004 257-002-005
Front Panels 251-011-004 257-002-005
Flush Filler 251-011-004 257-002-005
Filler and I/O 253-004-003
Angle Spt. Channel 286-005-004 80-0405-03
Mounting Angles 80-0304-03 286-004-004
Screw Side Panels 286-005-004 285-004-005
A90 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
