Page 88 - EEC_HeavyDuty
P. 88
Heavy Lift Bolt
Duty Lift Bolts and Gasketing The heavy steel lifting block is
welded directly into the frame
Lift Bolts are designed for the safe overhead lifting of heavily side assembly for direct lift on
loaded assemblies. The combination of a 1/2-13 forged steel eye the cabinet frame structure.
bolt, with an inside diameter of 1 1/16” and a 1 1/4”x1 1/4”x3”steel
block welded into the frame side assembly assures maximum
transportable loading. Lift Bolt assemblies must be installed at the
factory and the eye bolts are detached for shipping purposes. Four
Lift Bolts are used on Vertical Rack Cabinets and two Lift Bolts are
used on Sloped Front Cabinets. (See P/N’s at right to order)
Product Features
4 Rugged construction assures maximum
transportable loading
4 Eye bolts are plated
LIFT BOLTS
If You Want Order Part Number
Lift Bolts For 601-00-02-0000
Vertical Rack Cabinets typically 4 per frame required
Positioning of Lift Bolts on Vertical Rack Frames Sloped Front Cabinets typically 2 per frame required
and Sloped Front Cabinets
Typical installation of
Gasketing Gasketing on rear panel
The Heavy Duty Enclosure System has been designed so that any GASKETING
cabinet assembly can be gasketed against moisture or dust with no For Vertical Rack and
change in the construction of the cabinet frame, panels or doors. All Sloped Front Cabinets
All Flush Doors, Rear, Lower Front, Side and Top Panels and Flush
Filler Panels are equipped with rubber spacers, which when
removed allow a 1/8” space for gasketing. Gasketing may be
installed either at the factory or in the field.
Because of the ledge design of
the cabinet frame, doors or
panels located in any panel
opening may be gasketed.
If You Want Specify Catalog
Gasketing For Part Number
Installed 85-0505-01
Unmounted 85-0605-01
A88 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
Duty Lift Bolts and Gasketing The heavy steel lifting block is
welded directly into the frame
Lift Bolts are designed for the safe overhead lifting of heavily side assembly for direct lift on
loaded assemblies. The combination of a 1/2-13 forged steel eye the cabinet frame structure.
bolt, with an inside diameter of 1 1/16” and a 1 1/4”x1 1/4”x3”steel
block welded into the frame side assembly assures maximum
transportable loading. Lift Bolt assemblies must be installed at the
factory and the eye bolts are detached for shipping purposes. Four
Lift Bolts are used on Vertical Rack Cabinets and two Lift Bolts are
used on Sloped Front Cabinets. (See P/N’s at right to order)
Product Features
4 Rugged construction assures maximum
transportable loading
4 Eye bolts are plated
LIFT BOLTS
If You Want Order Part Number
Lift Bolts For 601-00-02-0000
Vertical Rack Cabinets typically 4 per frame required
Positioning of Lift Bolts on Vertical Rack Frames Sloped Front Cabinets typically 2 per frame required
and Sloped Front Cabinets
Typical installation of
Gasketing Gasketing on rear panel
The Heavy Duty Enclosure System has been designed so that any GASKETING
cabinet assembly can be gasketed against moisture or dust with no For Vertical Rack and
change in the construction of the cabinet frame, panels or doors. All Sloped Front Cabinets
All Flush Doors, Rear, Lower Front, Side and Top Panels and Flush
Filler Panels are equipped with rubber spacers, which when
removed allow a 1/8” space for gasketing. Gasketing may be
installed either at the factory or in the field.
Because of the ledge design of
the cabinet frame, doors or
panels located in any panel
opening may be gasketed.
If You Want Specify Catalog
Gasketing For Part Number
Installed 85-0505-01
Unmounted 85-0605-01
A88 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
