Page 64 - EEC_Challenger
P. 64
erhalleng
Hardware and
Miscellaneous
Mar-Proof Screws
For punched Vertical Mounting Rails. 80-0202-05 80-0201-05 80-0401-03
Screw 10B x 1 1/8”(80-0101-05) is used 80-0102-05 80-0101-05
with 5/8” formed panels, while 10B x 5/8” For mounting Flat or
(80-0102-05) is used with 1/8” flat panels. Formed Panels to tapped For mounting Flat or Formed Panels to
Screws & Speed Nuts® have Zinc Plating Vertical Mounting Rails punched Vertical Mounting Rails
with Trivalent Chromium Passivation.
Fastening Vertical Mounting Rails
If tapped Vertical Mounting Rails are used,
5/8” Formed Instrument Panels are fas- 286-005-004 The Vertical Mounting Rails are
tened to the mounting rails with 10-32 x 1” 80-0405-03 fastened to all frames with 10B x
(80-0201-05) Phillips Head machine 23/32” Phillips Head sheet metal
screws. 1/8” Flat Panels are fastened with For mounting screws, and Speed Nuts®. The
10-32 x 1/2”(80-0202-05) machine screws. Vertical Mounting Rails screws and Speed Nuts® have
Both screws have Mar-Proof recessed Zinc Plating with Trivalent
black nylon washers. Chromium Passivation.
Joining Channel
Joining Channels join Turrets or Bench Top 81-0101-02 Gasketing
Racks to Cabinet Frames as well as cabinet
frames front-to-back or back-to-back. The The gasketing of cabinet assemblies in the Challenger System of
recommended number required for these Modular cabinets is normally done at the factory, although gas-
panel heights are: keting may be installed in the field after installation of the enclo-
sures. The field installed gasketing has a self-adhesive backing
22 3/4”- 4 for ease of application. At the factory, a flat, neoprene sponge
35”- 6 textured strip gasketing is applied to the panels and doors.
Over 35”- 8
Gasket Number
Installed 85-0505-01
Not Installed 85-0605-01
Joining Kits
For joining frames, side to side, we recommend a kit with all the required hardware and drilling for joining. One kit
required per junction. The prefixes for hardware kits are:
HK -Hardware only.
HA -Hardware and assembly at factory. Multi bay assembly will ship as a single unit.
Joining Kits *__-4004
*__-4006
Vertical up to 28 3/4” Panel Space, Low Profile, Bench Top, 45° Double Slope *__-4008
Verical from 29 3/4” to 54 1/4” Panel Space, 30° Double Slope, 15°Double Slope
Vetiical from 56” to 84” Panel Space
80-0304-03 80-0604-03
Joining Kits include above zinc-plated
hardware for joining frames side-by-side
C64 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
Hardware and
Miscellaneous
Mar-Proof Screws
For punched Vertical Mounting Rails. 80-0202-05 80-0201-05 80-0401-03
Screw 10B x 1 1/8”(80-0101-05) is used 80-0102-05 80-0101-05
with 5/8” formed panels, while 10B x 5/8” For mounting Flat or
(80-0102-05) is used with 1/8” flat panels. Formed Panels to tapped For mounting Flat or Formed Panels to
Screws & Speed Nuts® have Zinc Plating Vertical Mounting Rails punched Vertical Mounting Rails
with Trivalent Chromium Passivation.
Fastening Vertical Mounting Rails
If tapped Vertical Mounting Rails are used,
5/8” Formed Instrument Panels are fas- 286-005-004 The Vertical Mounting Rails are
tened to the mounting rails with 10-32 x 1” 80-0405-03 fastened to all frames with 10B x
(80-0201-05) Phillips Head machine 23/32” Phillips Head sheet metal
screws. 1/8” Flat Panels are fastened with For mounting screws, and Speed Nuts®. The
10-32 x 1/2”(80-0202-05) machine screws. Vertical Mounting Rails screws and Speed Nuts® have
Both screws have Mar-Proof recessed Zinc Plating with Trivalent
black nylon washers. Chromium Passivation.
Joining Channel
Joining Channels join Turrets or Bench Top 81-0101-02 Gasketing
Racks to Cabinet Frames as well as cabinet
frames front-to-back or back-to-back. The The gasketing of cabinet assemblies in the Challenger System of
recommended number required for these Modular cabinets is normally done at the factory, although gas-
panel heights are: keting may be installed in the field after installation of the enclo-
sures. The field installed gasketing has a self-adhesive backing
22 3/4”- 4 for ease of application. At the factory, a flat, neoprene sponge
35”- 6 textured strip gasketing is applied to the panels and doors.
Over 35”- 8
Gasket Number
Installed 85-0505-01
Not Installed 85-0605-01
Joining Kits
For joining frames, side to side, we recommend a kit with all the required hardware and drilling for joining. One kit
required per junction. The prefixes for hardware kits are:
HK -Hardware only.
HA -Hardware and assembly at factory. Multi bay assembly will ship as a single unit.
Joining Kits *__-4004
*__-4006
Vertical up to 28 3/4” Panel Space, Low Profile, Bench Top, 45° Double Slope *__-4008
Verical from 29 3/4” to 54 1/4” Panel Space, 30° Double Slope, 15°Double Slope
Vetiical from 56” to 84” Panel Space
80-0304-03 80-0604-03
Joining Kits include above zinc-plated
hardware for joining frames side-by-side
C64 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
