Page 44 - EEC_Challenger
P. 44
erhalleng
Vertical Mounting Rails
Vertical Mounting Rails are used to mount equipment within the Standard Rails
cabinet. They are made of 11-gauge hot rolled steel, formed into normally furnished
a rugged angle shape with rolled edges to eliminate sharp corners. with Standard Racks
They are available either punched for Speed Nuts® and 10B sheet
metal screws or tapped 10-32 for machine screws. Vertical Rack Rails for mounting
Cabinets are supplied with four Punched Vertical Mounting Rails, 19” Panels in
two at the front and two at the rear of the cabinet frame. Six
Vertical Mounting Rails are supplied with all Sloped Front 24” Wide Openings
Cabinets, including two in the rear and four in the front of the
frame. If you would like tapped angles, in place of the punched
angles normally supplied please refer to the Frame Options
shown on the Vertical Rack Frame pages or Slope Front Frame
pages. Rails are shipped installed in the cabinet frame unless
extra Rails are ordered separately.
Product Features Rails for mounting
23” wide telephone
4 Formed of 11-gauge steel equipment in 24” Wide
Panel Openings
4 9/32” diameter holes spaced to comply with Universal
EIA Standard RS-310
4 Zinc Plating with Trivalent Chromium Passivation
VERTICAL MOUNTING RAILS
For Vertical Rack Frames
Height Standard 24” to 19” 24” to 23”
of Panel Rails Adapter Rails Adapter Rails
Opening
Punched Tapped Punched Tapped Punched Tapped
8 3/4”
10 1/2” 01-0801-02 01-0802-02 02-0801-02 02-0802-02 02-0801-23 02-0802-23
12 1/4” 01-1001-02 01-1002-02 02-1001-02 02-1002-02 02-1001-23 02-1002-23
01-1201-02 01-1202-02 02-1201-02 02-1202-02 02-1201-23 02-1202-23
14” 01-1401-02 01-1402-02 02-1401-02 02-1402-02 02-1401-23 02-1402-23
15 3/4” 01-1501-02 01-1502-02 02-1501-02 02-1502-02 02-1501-23 02-1502-23
17 1/2” 01-1701-02 01-1702-02 02-1701-02 02-1702-02 02-1701-23 02-1702-23
19 1/4” 01-1901-02 01-1902-02 02-1901-02 02-1902-02 02-1901-23 02-1902-23
01-2101-02 01-2102-02 02-2101-02 02-2102-02 02-2101-23 02-2102-23
21” 01-2201-02 01-2202-02 02-2201-02 02-2202-02 02-2201-23 02-2202-23
22 3/4” 01-2901-02 01-2902-02 02-2901-02 02-2902-02 02-2901-23 02-2902-23
29 3/4” 01-3501-02 01-3502-02 02-3501-02 02-3502-02 02-3501-23 02-3502-23
01-3601-02 01-3602-02 02-3601-02 02-3602-02 02-3601-23 02-3602-23
35” 01-4001-02 01-4002-02 02-4001-02 02-4002-02 02-4001-23 02-4002-23
36 3/4” 01-4301-02 01-4302-02 02-4301-02 02-4302-02 02-4301-23 02-4302-23
40 1/4” 01-4701-02 01-4702-02 02-4701-02 02-4702-02 02-4701-23 02-4702-23
43 3/4” 01-5201-02 01-5202-02 02-5201-02 02-5202-02 02-5201-23 02-5202-23
47 1/4” 01-6101-02 01-6102-02 02-6101-02 02-6102-02 02-6101-23 02-6102-23
52 1/2” 01-7001-02 01-7002-02 02-7001-02 02-7002-02 02-7001-23 02-7002-23
61 1/4” 01-7801-12 01-7802-02 02-7801-02 02-7802-02 02-7801-23 02-7802-23
70”
78 3/4”
C44 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
Vertical Mounting Rails
Vertical Mounting Rails are used to mount equipment within the Standard Rails
cabinet. They are made of 11-gauge hot rolled steel, formed into normally furnished
a rugged angle shape with rolled edges to eliminate sharp corners. with Standard Racks
They are available either punched for Speed Nuts® and 10B sheet
metal screws or tapped 10-32 for machine screws. Vertical Rack Rails for mounting
Cabinets are supplied with four Punched Vertical Mounting Rails, 19” Panels in
two at the front and two at the rear of the cabinet frame. Six
Vertical Mounting Rails are supplied with all Sloped Front 24” Wide Openings
Cabinets, including two in the rear and four in the front of the
frame. If you would like tapped angles, in place of the punched
angles normally supplied please refer to the Frame Options
shown on the Vertical Rack Frame pages or Slope Front Frame
pages. Rails are shipped installed in the cabinet frame unless
extra Rails are ordered separately.
Product Features Rails for mounting
23” wide telephone
4 Formed of 11-gauge steel equipment in 24” Wide
Panel Openings
4 9/32” diameter holes spaced to comply with Universal
EIA Standard RS-310
4 Zinc Plating with Trivalent Chromium Passivation
VERTICAL MOUNTING RAILS
For Vertical Rack Frames
Height Standard 24” to 19” 24” to 23”
of Panel Rails Adapter Rails Adapter Rails
Opening
Punched Tapped Punched Tapped Punched Tapped
8 3/4”
10 1/2” 01-0801-02 01-0802-02 02-0801-02 02-0802-02 02-0801-23 02-0802-23
12 1/4” 01-1001-02 01-1002-02 02-1001-02 02-1002-02 02-1001-23 02-1002-23
01-1201-02 01-1202-02 02-1201-02 02-1202-02 02-1201-23 02-1202-23
14” 01-1401-02 01-1402-02 02-1401-02 02-1402-02 02-1401-23 02-1402-23
15 3/4” 01-1501-02 01-1502-02 02-1501-02 02-1502-02 02-1501-23 02-1502-23
17 1/2” 01-1701-02 01-1702-02 02-1701-02 02-1702-02 02-1701-23 02-1702-23
19 1/4” 01-1901-02 01-1902-02 02-1901-02 02-1902-02 02-1901-23 02-1902-23
01-2101-02 01-2102-02 02-2101-02 02-2102-02 02-2101-23 02-2102-23
21” 01-2201-02 01-2202-02 02-2201-02 02-2202-02 02-2201-23 02-2202-23
22 3/4” 01-2901-02 01-2902-02 02-2901-02 02-2902-02 02-2901-23 02-2902-23
29 3/4” 01-3501-02 01-3502-02 02-3501-02 02-3502-02 02-3501-23 02-3502-23
01-3601-02 01-3602-02 02-3601-02 02-3602-02 02-3601-23 02-3602-23
35” 01-4001-02 01-4002-02 02-4001-02 02-4002-02 02-4001-23 02-4002-23
36 3/4” 01-4301-02 01-4302-02 02-4301-02 02-4302-02 02-4301-23 02-4302-23
40 1/4” 01-4701-02 01-4702-02 02-4701-02 02-4702-02 02-4701-23 02-4702-23
43 3/4” 01-5201-02 01-5202-02 02-5201-02 02-5202-02 02-5201-23 02-5202-23
47 1/4” 01-6101-02 01-6102-02 02-6101-02 02-6102-02 02-6101-23 02-6102-23
52 1/2” 01-7001-02 01-7002-02 02-7001-02 02-7002-02 02-7001-23 02-7002-23
61 1/4” 01-7801-12 01-7802-02 02-7801-02 02-7802-02 02-7801-23 02-7802-23
70”
78 3/4”
C44 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
