Page 3 - EEC_InstrumentCabinets
P. 3
Accessories
Chassis Supports CHASSIS SUPPORTS
Chassis Guides and Supports are designed to support heav- Overall Anodized Zinc-Plated
ily loaded chassis where it is necessary to move the Depth of Aluminum Steel
equipment into or out of the cabinet on an inter- Frame
mittent basis. They consist of two parts, Part No. Part No.
including an 11-gauge steel formed angle 18 1/2”
support bracket, which mounts directly to the Panel Mounting 22” AG-1800-00 SG-1800-00
Angles with 10B Phillips Head sheet metal screws and Speed AG-2200-00 SG-2200-00
Nuts®, and an adjustable 16-gauge steel guide angle. The guide 25 1/2” AG-2500-00 SG-2500-00
angle is adjustable from side-to-side to insure alignment of the
chassis with the panel opening to minimize possible damage to the Equipment Shelves Instrument Cabinets
chassis panel or the cabinet face. Chassis Supports are usually
shipped installed in the cabinet in the designated location. Equipment Shelves are designed to provide a rugged support
surface for heavy equipment such as chassis or power sup-
EQUIPMENT SHELVES plies. They are ideal where additional support or accessibili-
For Vertical Rack or Sloped Front Cabinets ty is needed and for equipment that must be
removed from time to time. They are
Frame Plain Equipment Shelf formed of 16-gauge steel or alu-
with Wireway minum. They may be
Overall Equipment Shelf ordered with 2” x 6”
Aluminum Steel oval cutout in rear
Depth Aluminum Steel for wireway. They
are usually shipped
For cabinet with a 19” wide panel space installed in the cabinet frame
in the designated location.
18 1/2” AS-1918-00 SS-1918-00 AS-1918-10 SS-1918-10
22” AS-1922-00 SS-1922-00 AS-1922-10 SS-1922-10
25 1/2” AS-1925-00 SS-1925-00 AS-1925-10 SS-1925-10
For cabinet with a 24” wide panel space Tilt bail
18 1/2” AS-2418-00 SS-2418-00 AS-2418-10 SS-2418-10
22” AS-2422-00 SS-2422-00 AS-2422-10 SS-2422-10 Self-locking bails can be added to all instrument cabinets in
25 1/2” AS-2425-00 SS-2425-00 AS-2425-10 SS-2425-10 lieu of the front feet. The bail feet allow
**Complete the last digit of the panel P/N with the following choices: the bail to snap-lock in the foldaway
position or extend in the snap-lock
3 with hardware for mounting in an Instrument Cabinet elevated position. They are
7 with hardware for shims & mtg in an Instrument Cabinet chrome plated.
1/8” THICK FLAT PLATE INSTRUMENT PANELS** TILT BAIL
Height Steel Panels Aluminum Panels Panel Width Part No.
of
Flat 19” Panel 24” Panel 19” Panel 24” Panel 19” RT-1900-00
24” RT-2400-00
Panel Width Width Width Width
Part No. Part No. Part No. Part No.
1 3/4” 21-0112-1_ 21-0122-1_ 21-0112-4_ 21-0122-4_ 1/8” Flat Instrument Panels
3 1/2” 21-0312-1_ 21-0322-1_ 21-0312-4_ 21-0322-4_
5 1/4” 21-0512-1_ 21-0522-1_ 21-0512-4_ 21-0522-4_ Flat Plate Instrument Panels are available in
21-0712-1_ 21-0722-1_ 21-0712-4_ 21-0722-4_ 1/8” thick steel or aluminum in both 19”
7” 21-0812-1_ 21-0822-1_ 21-0812-4_ 21-0822-4_ and 24” panel widths and in sixteen
8 3/4” 21-1012-1_ 21-1022-1_ 21-1012-4_ 21-1022-4_ heights. They are slotted for
10 1/2” 21-1212-1_ 21-1222-1_ 21-1212-4_ 21-1222-4_ E.I.A. Universal Standard RS-
12 1/4” 21-1412-1_ 21-1422-1_ 21-1412-4_ 21-1422-4_ 310 hole spacing. Panels are
14” 21-1512-1_ 21-1522-1_ 21-1512-4_ 21-1522-4_ fastened with sheet metal
15 3/4” 21-1712-1_ 21-1722-1_ 21-1712-4_ 21-1722-4_ screws, using Mar-proof
17 1/2” 21-1912-1_ 21-1922-1_ 21-1912-4_ 21-1922-4_ recessed black nylon washers
19 1/4” 21-2112-1_ 21-2122-1_ 21-2112-4_ 21-2122-4_ and Speed Nuts®.
21”
Visit our web site at www.equiptoelec.com for the latest technical data or a price quote G3
Chassis Supports CHASSIS SUPPORTS
Chassis Guides and Supports are designed to support heav- Overall Anodized Zinc-Plated
ily loaded chassis where it is necessary to move the Depth of Aluminum Steel
equipment into or out of the cabinet on an inter- Frame
mittent basis. They consist of two parts, Part No. Part No.
including an 11-gauge steel formed angle 18 1/2”
support bracket, which mounts directly to the Panel Mounting 22” AG-1800-00 SG-1800-00
Angles with 10B Phillips Head sheet metal screws and Speed AG-2200-00 SG-2200-00
Nuts®, and an adjustable 16-gauge steel guide angle. The guide 25 1/2” AG-2500-00 SG-2500-00
angle is adjustable from side-to-side to insure alignment of the
chassis with the panel opening to minimize possible damage to the Equipment Shelves Instrument Cabinets
chassis panel or the cabinet face. Chassis Supports are usually
shipped installed in the cabinet in the designated location. Equipment Shelves are designed to provide a rugged support
surface for heavy equipment such as chassis or power sup-
EQUIPMENT SHELVES plies. They are ideal where additional support or accessibili-
For Vertical Rack or Sloped Front Cabinets ty is needed and for equipment that must be
removed from time to time. They are
Frame Plain Equipment Shelf formed of 16-gauge steel or alu-
with Wireway minum. They may be
Overall Equipment Shelf ordered with 2” x 6”
Aluminum Steel oval cutout in rear
Depth Aluminum Steel for wireway. They
are usually shipped
For cabinet with a 19” wide panel space installed in the cabinet frame
in the designated location.
18 1/2” AS-1918-00 SS-1918-00 AS-1918-10 SS-1918-10
22” AS-1922-00 SS-1922-00 AS-1922-10 SS-1922-10
25 1/2” AS-1925-00 SS-1925-00 AS-1925-10 SS-1925-10
For cabinet with a 24” wide panel space Tilt bail
18 1/2” AS-2418-00 SS-2418-00 AS-2418-10 SS-2418-10
22” AS-2422-00 SS-2422-00 AS-2422-10 SS-2422-10 Self-locking bails can be added to all instrument cabinets in
25 1/2” AS-2425-00 SS-2425-00 AS-2425-10 SS-2425-10 lieu of the front feet. The bail feet allow
**Complete the last digit of the panel P/N with the following choices: the bail to snap-lock in the foldaway
position or extend in the snap-lock
3 with hardware for mounting in an Instrument Cabinet elevated position. They are
7 with hardware for shims & mtg in an Instrument Cabinet chrome plated.
1/8” THICK FLAT PLATE INSTRUMENT PANELS** TILT BAIL
Height Steel Panels Aluminum Panels Panel Width Part No.
of
Flat 19” Panel 24” Panel 19” Panel 24” Panel 19” RT-1900-00
24” RT-2400-00
Panel Width Width Width Width
Part No. Part No. Part No. Part No.
1 3/4” 21-0112-1_ 21-0122-1_ 21-0112-4_ 21-0122-4_ 1/8” Flat Instrument Panels
3 1/2” 21-0312-1_ 21-0322-1_ 21-0312-4_ 21-0322-4_
5 1/4” 21-0512-1_ 21-0522-1_ 21-0512-4_ 21-0522-4_ Flat Plate Instrument Panels are available in
21-0712-1_ 21-0722-1_ 21-0712-4_ 21-0722-4_ 1/8” thick steel or aluminum in both 19”
7” 21-0812-1_ 21-0822-1_ 21-0812-4_ 21-0822-4_ and 24” panel widths and in sixteen
8 3/4” 21-1012-1_ 21-1022-1_ 21-1012-4_ 21-1022-4_ heights. They are slotted for
10 1/2” 21-1212-1_ 21-1222-1_ 21-1212-4_ 21-1222-4_ E.I.A. Universal Standard RS-
12 1/4” 21-1412-1_ 21-1422-1_ 21-1412-4_ 21-1422-4_ 310 hole spacing. Panels are
14” 21-1512-1_ 21-1522-1_ 21-1512-4_ 21-1522-4_ fastened with sheet metal
15 3/4” 21-1712-1_ 21-1722-1_ 21-1712-4_ 21-1722-4_ screws, using Mar-proof
17 1/2” 21-1912-1_ 21-1922-1_ 21-1912-4_ 21-1922-4_ recessed black nylon washers
19 1/4” 21-2112-1_ 21-2122-1_ 21-2112-4_ 21-2122-4_ and Speed Nuts®.
21”
Visit our web site at www.equiptoelec.com for the latest technical data or a price quote G3
