Page 30 - EEC_HeavyDuty
P. 30
Heavy
Flush & Recessed
Duty Frame Bases
FLUSH AND PONTOON BASES For use with 24 1/16”, 29 1/16” and
36 1/16” Frame Depths (Single width)
For Vertical Rack and Sloped Front Cabinets
Top View
Depth of A Single Two Frames Three Frames Section A-A
Cabinet Frame
Frame Only Joined Joined
Part No. Side-By-Side Side-By-Side
Part No. Part No.
FLUSH FRAME BASES
For cabinet frames with a 19” wide panel space
17” 021-010-06* 022-010-06* 023-010-06*
24” 021-020-06 022-020-06 023-020-06
29” 021-030-06 022-030-06 023-030-06
36” 021-036-06 022-036-06 023-036-06
For cabinet frames with a 24” wide panel space
17” 021-040-06* 022-040-06* 023-040-06*
24” 021-050-06 022-050-06 023-050-06
29” 021-060-06 022-060-06 023-060-06
36” 021-066-06 022-066-06 023-066-06
RECESSED PONTOON FRAME BASES
For cabinet frames with a 19” wide panel space
17” 021-010-01* 022-010-01* 023-010-01*
24” 021-020-01 022-020-01 023-020-01
29” 021-030-01 022-030-01 023-030-01
36” 021-036-01 022-036-01 023-036-01
For cabinet frames with a 24” wide panel space
17” 021-040-01* 022-040-01* 023-040-01*
24” 021-050-01 022-050-01 023-050-01
29” 021-060-01 022-060-01 023-060-01
36” 021-066-01 022-066-01 023-066-01
*Add this style number to the partial part number of base select-
ed in chart above.
0—Plain
1—With provision for Duplex Outlet
3—With provisions for levelers
4—With provisions for anti-tip legs
5—With provisions for Duplex Outlet and levelers
7—With provisions for anti-tip legs and levelers
8—With provisions for anti-tip legs and Duplex Outlet
9—With provisions for anti-tip legs, levelers and Duplex Outlet
If ordering a flush frame base to be used with a seismic kit (Pge A25),
then change the last 3 digits of the flush base P/N to ‘160’
Example: 021-030-160
Leveling Glides Anti-Tip Legs
(4 required per base) (Order in pairs)
Part No. 81-0505-03 Part No. 81-0706-02
Leveling glides and anti-tip legs are not included with bases
and must be ordered separately.
A30 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
Flush & Recessed
Duty Frame Bases
FLUSH AND PONTOON BASES For use with 24 1/16”, 29 1/16” and
36 1/16” Frame Depths (Single width)
For Vertical Rack and Sloped Front Cabinets
Top View
Depth of A Single Two Frames Three Frames Section A-A
Cabinet Frame
Frame Only Joined Joined
Part No. Side-By-Side Side-By-Side
Part No. Part No.
FLUSH FRAME BASES
For cabinet frames with a 19” wide panel space
17” 021-010-06* 022-010-06* 023-010-06*
24” 021-020-06 022-020-06 023-020-06
29” 021-030-06 022-030-06 023-030-06
36” 021-036-06 022-036-06 023-036-06
For cabinet frames with a 24” wide panel space
17” 021-040-06* 022-040-06* 023-040-06*
24” 021-050-06 022-050-06 023-050-06
29” 021-060-06 022-060-06 023-060-06
36” 021-066-06 022-066-06 023-066-06
RECESSED PONTOON FRAME BASES
For cabinet frames with a 19” wide panel space
17” 021-010-01* 022-010-01* 023-010-01*
24” 021-020-01 022-020-01 023-020-01
29” 021-030-01 022-030-01 023-030-01
36” 021-036-01 022-036-01 023-036-01
For cabinet frames with a 24” wide panel space
17” 021-040-01* 022-040-01* 023-040-01*
24” 021-050-01 022-050-01 023-050-01
29” 021-060-01 022-060-01 023-060-01
36” 021-066-01 022-066-01 023-066-01
*Add this style number to the partial part number of base select-
ed in chart above.
0—Plain
1—With provision for Duplex Outlet
3—With provisions for levelers
4—With provisions for anti-tip legs
5—With provisions for Duplex Outlet and levelers
7—With provisions for anti-tip legs and levelers
8—With provisions for anti-tip legs and Duplex Outlet
9—With provisions for anti-tip legs, levelers and Duplex Outlet
If ordering a flush frame base to be used with a seismic kit (Pge A25),
then change the last 3 digits of the flush base P/N to ‘160’
Example: 021-030-160
Leveling Glides Anti-Tip Legs
(4 required per base) (Order in pairs)
Part No. 81-0505-03 Part No. 81-0706-02
Leveling glides and anti-tip legs are not included with bases
and must be ordered separately.
A30 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
