Page 44 - EEC_HeavyDuty

vy Mounting Angle Support Channels

Duty Rail Support Channels

Vertical Mounting Rail Support Channels are used to support the
Vertical Mounting Rails so that the equipment load can be evenly
distributed. They can be moved upward or downward in 1 3/4”
increments to minimize any interference with cabling or trans-
verse air for cooling. The Support Channels are not welded in a
fixed position, but rather fastened to the cabinet frame with four,
10 Bax 23/32”Phillips Hex Head sheet metal screws and four
SpeedNuts®. They are shipped attached to the cabinet unless
ordered separately as an extra.

Product Features

4 16-gauge cold rolled steel
4 Outward facing edges to increase safety during

installation or maintenance

4 Adjustable up or down in 1 ¾” increments

Angle Support Channel locations Mounting holes for recessing
Vertical Mounting Rails

View shows
Vertical Mounting
Rail Support Channel
fastened to frame

side flange

See Page 9 for a chart
showing the quantity of
vertical support chan-
nels supplied in each
frame

Vertical Mounting Rail
installed on Rail Support
Channel in a recessed position

ANGLE SUPPORT CHANNELS
For Vertical Rack and Sloped Front Frames

Section C-C Overall The Vertical Mounting
Depth of Rail Support Channels
A44 Frame
Below will Fit
17”
24” 066-417-170
29” 066-424-170
36” 066-429-170
066-436-170

Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314