Page 3 - EEC_HeavyDuty
P. 3
Heavy Duty
Quality Features
Quality Features Guarantee the Finest Moveable Angle Support Channels Heavy Duty
Electronic Cabinets Available
The horizontal side frame mem-
Sway-Proof Corners bers which support the panel
mounting angles can be removed
The double ledge, double plane corner construction used in the and reinstalled, or completely
equipto Enclosure System provides removed to suit your specific
maximum stability with modular requirements. With this feature,
design. This unique feature assures side members need no longer
increased load carrying capacity, interfere with cabling between
reduction of torsion to a minimum, and cabinets, impede air flow, or cre-
virtual elimination of side sway and ate unnecessary problems when
deflection of the frame from front to equipment must be installed through the side of the cabinet.
back.
Modern Hardware
Rugged
Mounting Angles The black-finished, extruded aluminum hard-
ware was designed by Equipto engineers to
Because the safety and reliability of harmonize well with the electronic equipment
equipment mounted in the panel open- and instrumentation installed in all Equipto
ings of an electronic enclosure cabinets. Door hinges, door handles with a
depends largely on how securely it two point latch system, drawer pulls and the
can be mounted, Equipto engineers black nylon washers for Equipto Mar-Proof
specified heavy 1 1/2” x 1 1/2” x 3/16” thick vertical mounting panel-mounting screws were all conceived to
rails for Equipto enclosures. compliment each other, creating a new style
trend in electronic cabinet hardware design.
Trigger Action Latches Heavier Pontoon Bases
As an optional feature in the Equipto Pontoon bases for Equipto enclosures
Enclosure System, latches make it possible are of channel design, constructed of 12-
to remove side and rear panels instantly gauge, cold rolled steel. This insures
from outside of the frame. The trigger and stability under severe handling and
bolt are finished in black to harmonize with mounting conditions. Since the
other hardware. The heavy bolt is designed bases can be removed if necessary,
so that in the open position, it forms a they need not be purchased with the
rugged handle to lift the latch panel easily frames if not required.
from its recess.
Mar-Proof Panel Screws Sag-Proof Doors
Equipto engineers have combined a 10B sheet metal screw with a Because of the double ledge construction of all Equipto
nylon washer making it practically Enclosure frames, all doors are mounted flush with the
impossible to scratch or mar the finish frame surface and recessed
of panels or equipment when screws within the protective perimeter
are removed and then reinstalled. The of the frame itself. All flush
use of Speed Nuts® permits low- doors are mounted with heavy
torque, positive vibration-proof fas- duty separable, extruded alu-
tening of your instrumentation. minum hinges having a 1/4”
stainless steel pin and a nylon
anti-friction bearing. This min-
imizes damage in shipment and
allows mounting of equipment
directly on doors where required. Doors are easily remov-
able.
Visit our web site at www.equiptoelec.com for the latest technical data or a price quote A3
Quality Features
Quality Features Guarantee the Finest Moveable Angle Support Channels Heavy Duty
Electronic Cabinets Available
The horizontal side frame mem-
Sway-Proof Corners bers which support the panel
mounting angles can be removed
The double ledge, double plane corner construction used in the and reinstalled, or completely
equipto Enclosure System provides removed to suit your specific
maximum stability with modular requirements. With this feature,
design. This unique feature assures side members need no longer
increased load carrying capacity, interfere with cabling between
reduction of torsion to a minimum, and cabinets, impede air flow, or cre-
virtual elimination of side sway and ate unnecessary problems when
deflection of the frame from front to equipment must be installed through the side of the cabinet.
back.
Modern Hardware
Rugged
Mounting Angles The black-finished, extruded aluminum hard-
ware was designed by Equipto engineers to
Because the safety and reliability of harmonize well with the electronic equipment
equipment mounted in the panel open- and instrumentation installed in all Equipto
ings of an electronic enclosure cabinets. Door hinges, door handles with a
depends largely on how securely it two point latch system, drawer pulls and the
can be mounted, Equipto engineers black nylon washers for Equipto Mar-Proof
specified heavy 1 1/2” x 1 1/2” x 3/16” thick vertical mounting panel-mounting screws were all conceived to
rails for Equipto enclosures. compliment each other, creating a new style
trend in electronic cabinet hardware design.
Trigger Action Latches Heavier Pontoon Bases
As an optional feature in the Equipto Pontoon bases for Equipto enclosures
Enclosure System, latches make it possible are of channel design, constructed of 12-
to remove side and rear panels instantly gauge, cold rolled steel. This insures
from outside of the frame. The trigger and stability under severe handling and
bolt are finished in black to harmonize with mounting conditions. Since the
other hardware. The heavy bolt is designed bases can be removed if necessary,
so that in the open position, it forms a they need not be purchased with the
rugged handle to lift the latch panel easily frames if not required.
from its recess.
Mar-Proof Panel Screws Sag-Proof Doors
Equipto engineers have combined a 10B sheet metal screw with a Because of the double ledge construction of all Equipto
nylon washer making it practically Enclosure frames, all doors are mounted flush with the
impossible to scratch or mar the finish frame surface and recessed
of panels or equipment when screws within the protective perimeter
are removed and then reinstalled. The of the frame itself. All flush
use of Speed Nuts® permits low- doors are mounted with heavy
torque, positive vibration-proof fas- duty separable, extruded alu-
tening of your instrumentation. minum hinges having a 1/4”
stainless steel pin and a nylon
anti-friction bearing. This min-
imizes damage in shipment and
allows mounting of equipment
directly on doors where required. Doors are easily remov-
able.
Visit our web site at www.equiptoelec.com for the latest technical data or a price quote A3
