Page 50 - EEC_Challenger
P. 50
erhalleng
Storage Drawers
Storage Drawers are designed to hold small tools, test equipment, STORAGE DRAWERS**
patch cords and other similar items which must be kept within
easy reach of the equipment assembly. They can be installed in Height of 19” Panel Width 24” Panel Width
various locations in all Vertical Rack cabinets and in the lower Drawer
sections of Sloped Front Console and Sloped Front Vertical Rack Frame Non-Latch Latch Non-Latch Latch
cabinets. They can be used in combination with Formed Type Type Type Type
Instrument Panels in the same panel opening. They are available
for 19” and 24” panel width cabinets, either 18 1/2”, 22”, 25 1/2”, For cabinet frames with an 18 1/2” overall depth
30 3/4” and 36” deep. 3 1/2” 14-0311-11 14-0311-31 14-0321-11 14-0321-31
5 1/4” 14-0511-11 14-0511-31 14-0521-11 14-0521-31
All Storage Drawers are supplied with easy acting ball bear-
ing Extension Slides with a rated capacity of 125 lbs. when fully 7” 14-0711-11 14-0711-31 14-0721-11 14-0721-31
extended. The Drawer Pulls are of a flush type with a recessed 8 3/4” 14-0811-11 14-0811-31 14-0821-11 14-0821-31
finger grip. They are available with or without a safety latch, 10 1/2” 14-1011-11 14-1011-31 14-1021-11 14-1021-31
which insures positive closure of the drawer and is recommended 12 1/4” 14-1211-11 14-1211-31 14-1221-11 14-1221-31
where vibration is a factor. All Storage Drawers are normally 14” 14-1411-11 14-1411-31 14-1421-11 14-1421-31
shipped installed in the cabinet in the specified location.
For cabinet frames with a 22” overall depth
Product Features 3 1/2” 14-0312-11 14-0312-31 14-0322-11 14-0322-31
5 1/4” 14-0512-11 14-0512-31 14-0522-11 14-0522-31
4 Drawer fronts formed of 16-gauge cold-rolled steel spot
welded to 20-gauge cold-rolled steel bodies 7” 14-0712-11 14-0712-31 14-0722-11 14-0722-31
8 3/4” 14-0812-11 14-0812-31 14-0822-11 14-0822-31
4 Mounted on zinc-plated Ball Bearing Extension Slides with 10 1/2” 14-1012-11 14-1012-31 14-1022-11 14-1022-31
125 lb. capacity 12 1/4” 14-1212-11 14-1212-31 14-1222-11 14-1222-31
14” 14-1412-11 14-1412-31 14-1422-11 14-1422-31
4 Drawer handles are finished black to match other Equipto
Electronic cabinet hardware For cabinet frames with a 25 1/2” overall depth
3 1/2” 14-0313-11 14-0313-31 14-0323-11 14-0323-31
**If the shelf or ball bearing slides will be mounted in a rack 5 1/4” 14-0513-11 14-0513-31 14-0523-11 14-0523-31
that has tapped vertical mounting rails (in lieu of punched
rails), then add a T to the part number in order to receive 7” 14-0713-11 14-0713-31 14-0723-11 14-0723-31
the proper mounting hardware. Example: T14-0713-11 8 3/4” 14-0813-11 14-0813-31 14-0823-11 14-0823-31
10 1/2” 14-1013-11 14-1013-31 14-1023-11 14-1023-31
Storage Drawers 12 1/4” 14-1213-11 14-1213-31 14-1223-11 14-1223-31
14” 14-1413-11 14-1413-31 14-1423-11 14-1423-31
For cabinet frames with a 30 3/4” overall depth
3 1/2” 14-0314-11 14-0314-31 14-0324-11 14-0324-31
5 1/4” 14-0514-11 14-0514-31 14-0524-11 14-0524-31
7” 14-0714-11 14-0714-31 14-0724-11 14-0724-31
8 3/4” 14-0814-11 14-0814-31 14-0824-11 14-0824-31
10 1/2” 14-1014-11 14-1014-31 14-1024-11 14-1024-31
12 1/4” 14-1214-11 14-1214-31 14-1224-11 14-1224-31
14” 14-1414-11 14-1414-31 14-1424-11 14-1424-31
For cabinet frames with a 36” overall depth
3 1/2” 14-0315-11 14-0315-31 14-0325-11 14-0325-31
5 1/4” 14-0515-11 14-0515-31 14-0525-11 14-0525-31
7” 14-0715-11 14-0715-31 14-0725-11 14-0725-31
8 3/4” 14-0815-11 14-0815-31 14-0825-11 14-0825-31
10 1/2” 14-1015-11 14-1015-31 14-1025-11 14-1025-31
12 1/4” 14-1215-11 14-1215-31 14-1225-11 14-1225-31
14” 14-1415-11 14-1415-31 14-1425-11 14-1425-31
C50 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
Storage Drawers
Storage Drawers are designed to hold small tools, test equipment, STORAGE DRAWERS**
patch cords and other similar items which must be kept within
easy reach of the equipment assembly. They can be installed in Height of 19” Panel Width 24” Panel Width
various locations in all Vertical Rack cabinets and in the lower Drawer
sections of Sloped Front Console and Sloped Front Vertical Rack Frame Non-Latch Latch Non-Latch Latch
cabinets. They can be used in combination with Formed Type Type Type Type
Instrument Panels in the same panel opening. They are available
for 19” and 24” panel width cabinets, either 18 1/2”, 22”, 25 1/2”, For cabinet frames with an 18 1/2” overall depth
30 3/4” and 36” deep. 3 1/2” 14-0311-11 14-0311-31 14-0321-11 14-0321-31
5 1/4” 14-0511-11 14-0511-31 14-0521-11 14-0521-31
All Storage Drawers are supplied with easy acting ball bear-
ing Extension Slides with a rated capacity of 125 lbs. when fully 7” 14-0711-11 14-0711-31 14-0721-11 14-0721-31
extended. The Drawer Pulls are of a flush type with a recessed 8 3/4” 14-0811-11 14-0811-31 14-0821-11 14-0821-31
finger grip. They are available with or without a safety latch, 10 1/2” 14-1011-11 14-1011-31 14-1021-11 14-1021-31
which insures positive closure of the drawer and is recommended 12 1/4” 14-1211-11 14-1211-31 14-1221-11 14-1221-31
where vibration is a factor. All Storage Drawers are normally 14” 14-1411-11 14-1411-31 14-1421-11 14-1421-31
shipped installed in the cabinet in the specified location.
For cabinet frames with a 22” overall depth
Product Features 3 1/2” 14-0312-11 14-0312-31 14-0322-11 14-0322-31
5 1/4” 14-0512-11 14-0512-31 14-0522-11 14-0522-31
4 Drawer fronts formed of 16-gauge cold-rolled steel spot
welded to 20-gauge cold-rolled steel bodies 7” 14-0712-11 14-0712-31 14-0722-11 14-0722-31
8 3/4” 14-0812-11 14-0812-31 14-0822-11 14-0822-31
4 Mounted on zinc-plated Ball Bearing Extension Slides with 10 1/2” 14-1012-11 14-1012-31 14-1022-11 14-1022-31
125 lb. capacity 12 1/4” 14-1212-11 14-1212-31 14-1222-11 14-1222-31
14” 14-1412-11 14-1412-31 14-1422-11 14-1422-31
4 Drawer handles are finished black to match other Equipto
Electronic cabinet hardware For cabinet frames with a 25 1/2” overall depth
3 1/2” 14-0313-11 14-0313-31 14-0323-11 14-0323-31
**If the shelf or ball bearing slides will be mounted in a rack 5 1/4” 14-0513-11 14-0513-31 14-0523-11 14-0523-31
that has tapped vertical mounting rails (in lieu of punched
rails), then add a T to the part number in order to receive 7” 14-0713-11 14-0713-31 14-0723-11 14-0723-31
the proper mounting hardware. Example: T14-0713-11 8 3/4” 14-0813-11 14-0813-31 14-0823-11 14-0823-31
10 1/2” 14-1013-11 14-1013-31 14-1023-11 14-1023-31
Storage Drawers 12 1/4” 14-1213-11 14-1213-31 14-1223-11 14-1223-31
14” 14-1413-11 14-1413-31 14-1423-11 14-1423-31
For cabinet frames with a 30 3/4” overall depth
3 1/2” 14-0314-11 14-0314-31 14-0324-11 14-0324-31
5 1/4” 14-0514-11 14-0514-31 14-0524-11 14-0524-31
7” 14-0714-11 14-0714-31 14-0724-11 14-0724-31
8 3/4” 14-0814-11 14-0814-31 14-0824-11 14-0824-31
10 1/2” 14-1014-11 14-1014-31 14-1024-11 14-1024-31
12 1/4” 14-1214-11 14-1214-31 14-1224-11 14-1224-31
14” 14-1414-11 14-1414-31 14-1424-11 14-1424-31
For cabinet frames with a 36” overall depth
3 1/2” 14-0315-11 14-0315-31 14-0325-11 14-0325-31
5 1/4” 14-0515-11 14-0515-31 14-0525-11 14-0525-31
7” 14-0715-11 14-0715-31 14-0725-11 14-0725-31
8 3/4” 14-0815-11 14-0815-31 14-0825-11 14-0825-31
10 1/2” 14-1015-11 14-1015-31 14-1025-11 14-1025-31
12 1/4” 14-1215-11 14-1215-31 14-1225-11 14-1225-31
14” 14-1415-11 14-1415-31 14-1425-11 14-1425-31
C50 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.897.46914Fax 630.897.5314
